# generated by SuperSlicer 2.3.57 on 2022-06-23 at 23:20:28 UTC
bed_custom_model = 
bed_custom_texture = 
bed_shape = 129.505x11.3302,128.025x22.5743,125.57x33.6465,122.16x44.4626,117.82x54.9404,112.583x65,106.49x74.5649,99.5858x83.5624,91.9239x91.9239,83.5624x99.5858,74.5649x106.49,65x112.583,54.9404x117.82,44.4626x122.16,33.6465x125.57,22.5743x128.025,11.3302x129.505,7.9602e-15x130,-11.3302x129.505,-22.5743x128.025,-33.6465x125.57,-44.4626x122.16,-54.9404x117.82,-65x112.583,-74.5649x106.49,-83.5624x99.5858,-91.9239x91.9239,-99.5858x83.5624,-106.49x74.5649,-112.583x65,-117.82x54.9404,-122.16x44.4626,-125.57x33.6465,-128.025x22.5743,-129.505x11.3302,-130x1.59204e-14,-129.505x-11.3302,-128.025x-22.5743,-125.57x-33.6465,-122.16x-44.4626,-117.82x-54.9404,-112.583x-65,-106.49x-74.5649,-99.5858x-83.5624,-91.9239x-91.9239,-83.5624x-99.5858,-74.5649x-106.49,-65x-112.583,-54.9404x-117.82,-44.4626x-122.16,-33.6465x-125.57,-22.5743x-128.025,-11.3302x-129.505,-2.38806e-14x-130,11.3302x-129.505,22.5743x-128.025,33.6465x-125.57,44.4626x-122.16,54.9404x-117.82,65x-112.583,74.5649x-106.49,83.5624x-99.5858,91.9239x-91.9239,99.5858x-83.5624,106.49x-74.5649,112.583x-65,117.82x-54.9404,122.16x-44.4626,125.57x-33.6465,128.025x-22.5743,129.505x-11.3302,130x-3.18408e-14
before_layer_gcode = \n
between_objects_gcode = 
color_change_gcode = M600
cooling_tube_length = 5
cooling_tube_retraction = 91.5
default_filament_profile = "Generic PLA @FLSUN"
default_print_profile = 0.20mm QUALITY @FLSUN
deretract_speed = 20
end_gcode = M106 S255\nM104 S0\nM140 S0\nG92 E0\nG1 E-1 F1800\nG28\nM107\nneo_off\n\n
extra_loading_move = -2
extruder_colour = ""
extruder_fan_offset = 0%
extruder_offset = 0x0
extruder_temperature_offset = 0
fan_kickstart = 0
fan_percentage = 0
fan_speedup_overhangs = 1
fan_speedup_time = 0
feature_gcode = 
gcode_filename_illegal_char = 
gcode_flavor = klipper
gcode_precision_e = 4
gcode_precision_xyz = 4
high_current_on_filament_swap = 0
host_type = octoprint
inherits = FLSun QQS Pro
layer_gcode = 
lift_min = 0
machine_limits_usage = time_estimate_only
machine_max_acceleration_e = 2000,800
machine_max_acceleration_extruding = 2000,800
machine_max_acceleration_retracting = 2000,800
machine_max_acceleration_travel = 2000,1250
machine_max_acceleration_x = 2000,800
machine_max_acceleration_y = 2000,800
machine_max_acceleration_z = 2000,800
machine_max_feedrate_e = 100,30
machine_max_feedrate_x = 300,150
machine_max_feedrate_y = 300,150
machine_max_feedrate_z = 300,150
machine_max_jerk_e = 4,5
machine_max_jerk_x = 4,10
machine_max_jerk_y = 4,10
machine_max_jerk_z = 4,10
machine_min_extruding_rate = 0,0
machine_min_travel_rate = 0,0
max_gcode_per_second = 1500
max_layer_height = 0.32
max_print_height = 360
milling_diameter = 
milling_toolchange_end_gcode = 
milling_toolchange_start_gcode = 
milling_z_lift = 
min_layer_height = 0.08
min_length = 0.035
nozzle_diameter = 0.4
parking_pos_retraction = 92
pause_print_gcode = M601
print_host = 
printer_custom_variables = 
printer_model = QQSP
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_FLSun\nPRINTER_MODEL_QQSP\nPRINTER_HAS_BOWDEN\n
printer_settings_id = 
printer_technology = FFF
printer_variant = 0.4
printer_vendor = 
printhost_apikey = 
printhost_cafile = 
printhost_port = 
remaining_times = 0
remaining_times_type = m73
retract_before_travel = 2
retract_before_wipe = 70%
retract_layer_change = 0
retract_length = 0.5
retract_length_toolchange = 1
retract_lift = 0
retract_lift_above = 0
retract_lift_below = 0
retract_lift_first_layer = 0
retract_lift_top = "All surfaces"
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 30
seam_gap = 15%
silent_mode = 1
single_extruder_multi_material = 0
start_gcode = neo_timelapse\nM190 S[first_layer_bed_temperature] ; set and wait for bed temperature\nM104 S[first_layer_temperature] ; set nozzle temperature\nG28 ; home\nM109 S[first_layer_temperature] ; set and wait for nozzle temperature
start_gcode_manual = 0
template_custom_gcode = 
thumbnails = 16x16,256x256
thumbnails_color = #018aff
thumbnails_custom_color = 0
thumbnails_end_file = 0
thumbnails_with_bed = 1
time_estimation_compensation = 100%
tool_name = ""
toolchange_gcode = 
use_firmware_retraction = 0
use_relative_e_distances = 0
use_volumetric_e = 0
variable_layer_height = 1
wipe = 1
wipe_advanced = 0
wipe_advanced_algo = linear
wipe_advanced_multiplier = 60
wipe_advanced_nozzle_melted_volume = 120
wipe_extra_perimeter = 0
wipe_only_crossing = 1
wipe_speed = 0
z_offset = 0
z_step = 0.005